Delock DisplayPort 1.2 Splitter 1 x DisplayPort in > 4 x DisplayPort out 4K
Item No. 87694
This product is not available anymore.
Successor:
87693 - DisplayPort 1.2 Splitter 1 x mini DisplayPort in > 4 x DisplayPort out 4KDescription
This splitter by Delock receives a DisplayPort signal from a PC or laptop and splits it to four connected displays. Thereby one DisplayPort connection can be used to operate four DisplayPort monitors. The outputs are dual-mode capable (DP++), so that HDMI or DVI monitors can be connected with suitable adapters.
Note
The product is a Multi-Stream Transport (MST) hub and supports the extended desktop configuration of DisplayPort 1.2. When Mac OS is used, the same image is displayed on both ports (mirrored), it is not possible to use both ports independently of each other.
Technical details
- Connectors:
Input:
1 x DisplayPort 20 pin male
1 x 5 V DC jack
Output:
4 x DisplayPort 20 pin female - Chipset: STDP4320
- DisplayPort 1.2a specification
- Active converter, Single- / Multi-Stream Transport Hub (SST / MST)
- Functions: Mirrored or Extended (Windows only)
- Maximum resolution (depending on the system and the connected hardware):
DisplayPort 1.1 or 1.2 Single Stream Transport (SST):
up to 1920 x 1080 @ 60 Hz (mirror)
DisplayPort 1.2 Multi-Stream Transport (MST):
up to 2560 x 1440 @ 60 Hz or 3840 x 2160 @ 30 Hz (mirror or extended)
max. 4x 1920 x 1080 @ 60 Hz - DisplayPort output supports Dual Mode DP++
- Supports Eyefinity / Single Large Surface (SLS)
- Supports audio and video signals
- Supports HDCP 1.3
- Audio input formats: 7.1 channel up to 192 kHz sample rate
- Metal housing
- Cable length without connectors: ca. 30 cm
- Colour: black
- Dimensions (LxWxH): ca. 143 x 67 x 23 mm
Power supply specification
- Wall power supply
- Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.4 A
- Output: 5 V / 2 A
- Ground outside, plus inside
- Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 9 mm
System requirements
- A free DisplayPort female
Package content
- DisplayPort Splitter
- External power supply
- User manual
Package
- Retail Box
Revision notice
07/2021 New power supply
General
Specification
• DisplayPort 1.2a
Interface
Output
• 4 x DisplayPort female
Input
• 1 x 5 V DC female 5,5 mm x 2,1 mm
• 1 x DisplayPort male
• 1 x DisplayPort male
Technical characteristics
Chipset
• Kinetic STDP4320
Maximum screen resolution
• 3840 x 2160 @ 30 Hz
Physical characteristics
Housing material
• metal
Cable length incl. connectors
• 30 cm
Length
• 143 mm
Width
• 67 mm
Height
• 23 mm
Colour
• black
Power supply
Power supply type
• Euro wall power supply
Power supply connector
• DC male 5.5 mm x 2.1 mm
Extended Desktop
The splitter is a Multi-Stream-Transport (MST) hub and supports extended desktop configuration. MST mode is only available on DisplayPort 1.2 graphics cards. The splitter will show the same image (mirror) on both outputs if a graphics card with Displayport 1.1 is used.
Maximum Resolution
A single Displayport 1.2 connection has a limit amount of bandwidth. This limits the number of displays that can be connected through an MST hub depending on the displays resolution, timing and refresh rate. Please see below for bandwidth usage of different resolutions:
1920 x 1080 @ 60 Hz uses 22%, 1920 x 1200 @ 60 Hz uses 30% bandwidth
2560 x 1440 @ 60 Hz uses 35%, 2560 x 1600 @ 60 Hz uses 38% bandwidth
3840 x 2160 @ 30 Hz uses 43%, 3840 x 2160 @ 60 Hz uses 95% bandwidth
1920 x 1080 @ 60 Hz uses 22%, 1920 x 1200 @ 60 Hz uses 30% bandwidth
2560 x 1440 @ 60 Hz uses 35%, 2560 x 1600 @ 60 Hz uses 38% bandwidth
3840 x 2160 @ 30 Hz uses 43%, 3840 x 2160 @ 60 Hz uses 95% bandwidth
similar items
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.

Delock DisplayPort 1.4 Splitter 1 x DisplayPort in to 4 x DisplayPort out
Item No. 87794

Delock DisplayPort 1.2 Splitter 1 x mini DisplayPort in > 4 x DisplayPort out 4K
Item No. 87693

Delock DisplayPort 1.4 Splitter 1 x DisplayPort to 3 x HDMI MST
Item No. 87770