buy now

Delock USB Type-C™ Converter for 1 x M.2 NVMe SSD + 1 x SATA SSD / HDD with Clone Function

Item No. 64252

Overview

Description

This converter by Delock enables the simultaneous operation of an M.2 NVMe SSD, in 2280, 2260, 2242 and 2230 format, and a 2.5″ or 3.5″ SATA HDD or SSD through the USB interface.

Clone Function without PC

The built-in clone function allows to clone memory without using a PC. It is possible to clone from NVMe to SATA and SATA to NVMe.

Technical details

Connectors:
  1 x USB 10 Gbps USB Type-C™ female
  1 x M.2 key M slot
  1 x SATA 6 Gb/s 22 pin receptacle
  1 x DC jack
Chipset: JMicron JMS581D
Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key M or key B+M based on PCIe (NVMe)
Maximum height of the components on the module: 1.5 mm, application of double-sided assembled modules supported
For 2.5″ and 3.5″ SATA HDD / SSD
Supports NVM Express (NVMe)
Supports S.M.A.R.T.
Supports TRIM
Supports Native Command Queuing (NCQ)
Data transfer rate up to 10 Gbps
Supports UASP
7 x LED indicator for power, access and copy status
Bootable
Function key:
  1 x Clone button
  1 x On / Off switch
  1 x switch for clone mode
Dimensions (LxWxH): ca. 107 x 35 x 24 mm
Hot Plug, Plug & Play

Power supply specification

Wall power supply
Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1.5 A
Output: 12 V / 3 A
Ground outside, plus inside
Dimensions:
  inside: ø ca. 2.5 mm
  outside: ø ca. 5.5 mm
  length: ca. 10 mm

System requirements

Android 11.0 or above
Chrome OS
Linux Kernel 5.15 or above
Mac OS 12.4 or above
Windows 10/10-64/11
iPad Air (4th Generation) or above
iPad Pro (3rd Generation) or above
Surface Pro 7
PC or laptop with a free USB Type-A port or
Device with a free USB Type-C™ port or with a free Thunderbolt™ 3 or Thunderbolt™ 4 port