Delock 2.5″ Converter SATA 22 pin > 2 x M.2 with RAID 7 mm
Description
This Delock converter enables the connection of up to two M.2 SSD in 2280, 2260, 2242 or 2230 format which can be used as a 2.5″ HDD. The converter can be installed into your system internally through an SATA 22 pin interface. When using more than one SSD, you have the possibility to use different RAID level.
Note
The SMART function is not supported. JBOD is only supported on SATA controllers with port multiplier function.
Specification
- Connectors:
1 x SATA 6 Gb/s 22 pin receptacle
2 x 67 pin M.2 key B slot - Interface: SATA
- Chipset: JMS562
- Form factor: 2.5″
- Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key B or key B+M based
on SATA - Maximum height of the components on the module: 1.5 mm, application of double-sided
assembled modules supported - Data transfer rate up to 6 Gb/s
- Supports RAID 0, 1, JBOD
- RAID mode set by jumper on board
- 3 x LED indicator
- Bootable
- OS independent, no driver installation necessary
System requirements
- A free SATA 22 pin interface
Package content
- Converter
- 4 x screw
- User manual
Package
- Box
General
Form factor
• 2.5"
Supported operating system
• OS independent, no driver installation necessary
LED indicator
• 3 x
Slot
• SATA
Supported module
• M.2 modules in format 2280, 2260, 2242 and 2230 with key B or key B+M based on SATA
Maximum height of the components on the module
• 1.5 mm application of double-sided assembled modules supported
Interface
Connector 1
• 1 x SATA 6 Gb/s 22 pin receptacle
Connector 2
• 2 x 67 pin M.2 NGFF key B slot
Technical characteristics
Chipset
• JMS562
Data transfer rate
• 6 Gb/s
RAID function
• JBOD
• 0
• 1
• 0
• 1
15.08.2019
Datenblatt
15.08.2019
Data sheet
15.08.2019
Dane produktu
15.08.2019
Popis produktu
15.08.2019
Feuille de données
15.08.2019
Hoja de datos
15.08.2019
Datablad
15.08.2019
Adatlap
15.08.2019
Kataloški list
15.08.2019
Φύλλο δεδομένων
15.08.2019
Scheda tecnica
15.08.2019
Fișă cu date