|
Item 62642
Adapter SuperSpeed USB (USB 3.1, Gen 1) with USB Type-C™ male to Gigabit LAN 10/100/1000 Mb/s
Expand your PC / laptop via a USB Type-C™ port by one network interface.
• 1 x SuperSpeed USB (USB 3.1, Gen 1) USB Type-C™ male >
1 x Gigabit LAN RJ45 female
• Chipset: ASIX
• SuperSpeed USB - 5 Gbps specification
• Compatible with:
IEEE 802.3: 10BASE-T
IEEE 802.3u: 100BASE-TX
IEEE 802.3ab: 1000BASE-T
• Support Auto MDI-X (automatic detection of standard
or crossover network cable)
• Supports Wake On LAN (WOL)
• Support IEEE 802.3az (Energy Efficient Ethernet)
• Support full duplex operation with IEEE 802.3x flow control and
half duplex operation with back-pressure flow control
• LED indicator for power and activity
• Power consumption: ca. 975 mW
• USB bus powered
• Cable length: ca. 20 cm (incl. connector)
• Dimensions (LxWxH): ca. 68 x 31 x 18 mm
|
|
Application Example
|
Item 62648
Converter Raspberry Pi USB Micro B female / USB pin header to mSATA 6 Gb/s
Connection of a mSATA module to your Raspberry Pi via the Micro USB port or the USB pin header connector.
• 1 x USB 2.0 type Micro B female
• 1 x 5 pin USB 2.0 pin header (4 pins connected)
• 1 x 2 pin power connector
• 1 x mSATA 6 Gb/s slot (full size)
• Chipset: Renesas D720231A
• Supports ATA/ATAPI packet command set and LBA 48
addressing mode
• Compliant with OHCI 1.0a and EHCI 0.95
• Jumper for setting the power supply via USB or
2 pin power connector
• LED indicator for activity
• OS independent, no driver installation necessary
• Dimensions (LxWxH): ca. 65 x 56 x 12 mm
|
|
Application Example
|
Item 62649
Converter Raspberry Pi USB Micro B female / USB pin header to 2 x USB type A female + 2 x serial RS-232
Expands your Raspberry Pi by two USB A ports and two RS-232
ports via the Micro USB port or the USB pin header connector.
• 1 x USB 2.0 type Micro B female
• 1 x 5 pin USB 2.0 pin header (4 pins connected)
• 1 x 2 pin power connector
• 2 x USB 2.0 type A female
• 1 x serial RS-232 DB9 male
• 1 x 9 pin serial RS-232 pin header
• Chipset: Prolific PL2303RA + Renesas D720114
• Data transfer rate:
serial up to 230.4 Kb/s
USB 2.0 up to 480 Mb/s
• Compliant with OHCI 1.0a and EHCI 0.95
• 2 x jumper for selection of RI or 5 V output for each RS-232
port on pin 9
• 1 x jumper for setting the power supply via USB or
2 pin power connector
• OS independent, no driver installation necessary
• Dimensions (LxWxH): ca. 66 x 64 x 18 mm
|
|
Application Example
|
Item 62650
Hub Raspberry Pi USB Micro B female / USB pin header to 4 x USB type A female
Expands your Raspberry Pi by four USB A ports or two 9 pin USB pin header via the Micro USB port or the USB pin header.
• 1 x USB 2.0 type Micro B female
• 1 x 5 pin USB 2.0 pin header (4 pins connected)
• 1 x 2 pin power connector
• 4 x USB 2.0 type A female
• 2 x 9 pin USB 2.0 pin header
• Chipset: Renesas D720114
• Data transfer rate up to 480 Mb/s
• Compliant with OHCI 1.0a and EHCI 0.95
• Jumper for setting the power supply via USB or
2 pin power connector
• OS independent, no driver installation necessary
• Dimensions (LxWxH): ca. 65 x 56 x 18 mm
|
|
|
Item 18211
Mounting Kit for Raspberry Pi
For connection or stacking on top of each other of different add-on modules e.g. adapter or converter to your Raspberry Pi board. (Application example item 62648, item 62649, item 62650)
• Raspberry Pi boards can be stacked on top of each other
• Connect adapter and converter to the Raspberry board
• Set consisting of:
4 x M2.5 4 mm screw
4 x nut
4 x M2.5 standoff, length: 20 mm
|
|
|
Item 87656
Gigabit PoE+ Injector 802.3at
Power supply via a network cable to a PoE-enabled device, such as an IP camera or a PoE splitter.
• 1 x RJ45 female (Data In)
• 1 x RJ45 female (Power + Data Out)
• 1 x terminal block (Power)
• 1 x DC female 5.5 x 2.1 mm (Power)
• Data transfer rate up to 1 Gb/s
• LED indicator (power)
• Supports IEEE802.3at (PoE+) and 802.3af (PoE)
• Wall mounting integrated in the housing
• Power consumption: max. 30 W
• Operating temperature: 0 °C ~ 50 °C
• Dimensions (LxWxH): ca. 80 x 68 x 24 mm
|
|
|
Item 87657
Gigabit PoE+ Splitter 802.3at
Splits the power supply of a PoE injector into an adjustable voltage and a network connection for non-PoE-enabled device.
• 1 x RJ45 female (Data + Power In)
• 1 x RJ45 female (Data Out)
• 1 x DC female 5.5 x 2.1 mm (Power Out)
• Output Power: DC 5 V / 7.5 V / 9 V / 12 V (selectable), 2.0 A max.
• Data transfer rate up to 1 Gb/s
• LED indicator (power, selected voltage)
• Supports IEEE802.3at (PoE+) and 802.3af (PoE)
• Wall mounting integrated in the housing
• Power consumption: max. 2 W
• Operating temperature: 0 °C ~ 45 °C
• Dimensions (LxWxH): ca. 78 x 72 x 27 mm
|
|
More about 4K Ultra HD!
|
Item 84751
Cable High Speed HDMI with Ethernet – HDMI A male to HDMI A male 4K
Fast data transfer as well as Audio-/ Video- and Ethernet connection. Connection of a monitor or TV to your PC or o DVD / Blu-ray drive in
4K Ultra HD quality.
• High Speed HDM A 19 pin male >
High Speed HDMI A 19 pin male
• High Speed HDMI with Ethernet (HEC) specification
• Cable gauge: 28 AWG
• Cable diameter: ca. 7.3 mm
• Twisted-pair cabling
• Copper conductor
• Gold-plated connector
• Transfer of digital audio signals and video signals in HD quality
• Data transfer rate up to 10.2 Gb/s
• Supports a resolution up to 3840 x 2160 @ 30 Hz
(depending on the system and the connected hardware)
• 3D support up to 1080p in two video streams with each
60 picture per second
• Up to 120 Hz refresh rate
• Contains the new Audio Return Channel (ARC)
• Uses new advanced colour space for presentation of digital pictures
• Supports Dolby® TrueHD and DTS-HD Master Audio™
• Cable length: ca. 0.5 m (incl. connector)
Other cable lengths:
1 m Item 84752 ,
1,5 m Item 84753
|
|
|
Item 84767
Cable SATA Express 18 pin male + SATA Power to SATA Express 29 pin male
Connection of a SSD to a free SATA Express port of your PC. Higher data transfer rates through simultaneous usage of two PCI Express lanes.
• SATA Express 18 pin (7+7+4 pin) male + SATA Power 15 pin >
SATA Express 29 pin (15+7+7 pin) male
• Data transfer rate up to 1 Gb/s (PCI Express Rev. 2.0)
e. g. 2 Gb/s (PCI Express Rev. 3.0)
• Cable gauge: 26 AWG
• Supports AHCI and NVMHCI/NVMe protocol
• Cable length: ca. 30 cm (without connector)
|
|
|
Item 62651
Converter Slim SATA 13 pin to USB 2.0 type B female
Operation of your optical drive with Slim SATA interface via the USB interface.
• 1 x 13 pin Slim SATA male >
1 x USB 2.0 type B female
• 1 x 4 pin USB 2.0 pin header
• 1 x 4 pin power connector (optional)
• Power supply via USB host or the additional 4 pin power connector
• Data transfer rate up to 480 Mb/s
• Compatible with OHCI 1.0a specification
• Supports Spread Spectrum
|
|
|
Item 62652
Converter SATA 6 Gb/s to USB 3.0 type B female
Operation of your optical drive with SATA interface via the USB interface.
• 1 x SATA 6 Gb/s 22 pin male >
1 x USB 3.0 type B female
• 1 x SATA 15 pin power connector
• Data transfer rate up to 5 Gb/s
• Pin header for LED
• Supports ATA/ATAPI Packet command set and ATA/ATAPI
LBA 48 addressing mode
• Write protect function prevents the writing of data to the SATA drive
• Compatible with OHCI 1.0a specification
• Supports Spread Spectrum
|
|