|
Item 89594
PCI Express Card > 1 Gigabit LAN PoE+ RJ45
• Connector external:
1 x Gigabit LAN RJ45 female with screw nuts
• Connector internal:
1 x SATA 15 pin power connector
1 x PCI Express x1, V1.1
• Data transfer rate:
Ethernet up to 10 Mbps
Fast Ethernet up to 100 Mbps
Gigabit Ethernet up to 1 Gbps
PCI Express x1 up to 2.5 Gbps
• Power delivery: max. 30 W total
• PoE power input from PCIe or SATA 15 pin power connector
|
|
|
Item 62948
Converter M.2 Key M male > 2 x Serial RS-422 / 485 male
• Connectors:
1 x 67 pin M.2 key M male
2 x 10 pin pin header
2 x serial RS-422 / 485 Sub-D 9 pin male with nuts on cable
• Chipset: Exar 17V352
• Interface: PCIe
• Form factor: M.2 2260
• Suitable for M.2 slot with key M based on PCIe
• 2 x jumper for mode setting
• Compatible with 16C550 UART
• ±15 kV ESD protection for all serial signals
• Data transfer rate up to 921.6 Kbps
• Operating temperature: -30 °C ~ 75 °C
• Dimensions (LxWxH): ca. 60 x 22 x 8 mm
|
|
|
Item 62949
Converter M.2 Key A+E male > 1 x RJ45 Gigabit LAN port vertical
• Connectors:
1 x 59 pin M.2 key A+E male
1 x Gigabit LAN RJ45 female
• Chipset: Realtek RTL8168E
• Interface: PCIe
• Form factor: M.2 2260
• Suitable for M.2 slot with key A or E based on PCIe
• Data transfer rate:
Ethernet up to 10 Mb/s (Half/Full Duplex)
Fast Ethernet up to 100 Mb/s (Half/Full Duplex)
Gigabit Ethernet up to 1000 Mb/s (Half/Full Duplex)
• Compatible with:
IEEE 802.3: 10BASE-T
IEEE 802.3u: 100BASE-TX
IEEE 802.3ab: 1000BASE-T
• LED indicator for power and activity
• Dimensions (LxWxH): ca. 60 x 22 x 20 mm
|
|
|
Item 91657
3.5″ USB 3.0 Card Reader 4 slot + 1 x USB-C™ female + 3 x USB 3.0-A female
• Connectors external:
4 x Card Reader slots
1 x SuperSpeed USB (USB 3.1 Gen 1) USB Type-C™ female
1 x USB Type-A female charging port
2 x SuperSpeed USB (USB 3.1 Gen 1) Type-A female
• Connectors internal:
1 x 19 pin USB 3.0 pin header female
1 x Molex 4 pin male
• Chipset: GL3522 (Hub), RTS5321 (Card Reader)
• Metal housing for installation into a 3.5″ bay
• Data transfer rate up to 5 Gbps
• Maximum output current:
USB Type-C™ / USB Type-A female 5 V / 1.5 A
USB Type-A female charging port 5 V / 2.4 A
• LED indicator for the card reader for power (green) and access (red)
• Cable data:
1 x 19 pin USB 3.0 pin header female cable ca. 53 cm
(incl. connector)
1 x 4 pin power cable ca. 28 cm (incl. connector)
• Supports following 36 memory cards
|
|
|
Item 91710
USB 3.0 Card Reader 4 Slots All in 1
• Connectors:
1 x USB 3.0 Type Micro-B female
1 x CF type II slot
1 x Micro SD slot
1 x SD / MMC slot
1 x MS slot
• Chipset: Realtek RTS5321
• Data transfer rate up to: SuperSpeed USB 5 Gbps
• Supports PIO, DMA, UDMA mode
• Supports UDMA 7
• Supports SD 3.0 (UHS-I), SD 4.0 (UHS-II)
• Supports following 36 memory cards:
• Dimensions (LxWxH): ca. 85 x 52 x 19 mm
|
|
|
Item 62869
In-Desk Hub 3 Port USB 3.0 + 2 Slot SD Card Reader
• Connectors top side:
3 x USB 3.0 Type-A female
1 x SD slot
1 x Micro SD slot
• Connectors bottom side:
1 x USB 3.0 Type-A male
1 x USB 2.0 Type-A male (power supply)
• Chipset: VL813, GL3233
• Data transfer rate up to: SuperSpeed USB 5 Gbps
• The Card Reader supports following 21 memory cards
• Mounting diameter: 60 mm / 80 mm
• Mounting depth: 35 mm
• Cable length: ca. 95 cm
|
|
|
Item 42591
3.5″ External Enclosure SATA HDD > USB 3.1 Gen 2
• Connectors external:
1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) Type Micro-B female
1 x DC jack
• Connectors internal:
1 x SATA 6 Gb/s 22 pin plug
• On / Off switch
• Suitable for all 3.5″ SATA HDDs up to 6 Gb/s
• Chipset: Asmedia ASM1351
• Data transfer rate up to 6 Gb/s
• LED indicator for power and access
• Dimensions (LxWxH): ca. 206 x 124 x 32 mm
|
|