If this email should not be displayed properly, please click here Version CW 7-2017
banner
62709
tunderbolt3
Item 62709

Adapter Thunderbolt™ 3 male >
Thunderbolt™ female

•  Connector:
         1 x Thunderbolt™ 3 USB Type-C™ 24 pin male
         1 x Thunderbolt™ 2 20 pin female
•  Data transfer rate up to 20 Gbps
•  Compatible to Thunderbolt™ 2 and Thunderbolt™ 1
•  Thunderbolt™ 3 bus powered
•  Plug & Play
•  Cable length without connector: ca. 11 cm
•  Dimensions of the adapter (LxWxH): ca. 88.7 x 58.4 x 16.5 mm


size_comparison
Item 96381

USB 2.0 Camera Module 5.04 mega pixel 62° vertical edge auto focus

•  Connector:
         USB 2.0 5 pin SMT female SMT, 1 mm pitch
•  Resolution: 5.04 mega pixel
•  With optical IR filter
•  Standard SCCB interface (I²C Bus)
•  Output support for RAW RGB, RGB565/555/444, CCIR656,
    YUV422/420, YCbCr422 and compression
•  Maximum resolution: QSXGA (2592 x 1944)
•  Automatic image control functions including
•  Image quality controls including colour saturation, gamma,
    sharpness (edge enhancement), lens correction, white pixel
    canceling, noise canceling, and automatic 50/60 Hz luminance
    detection
•  Supports scaling
•  Operating voltage: 5 V DC
•  Operating temperature: 5 °C ~ 50 °C
•  Auto focus: from 0.1 m
•  Frame rates:
    30 fps @ HVGA, VGA, XGA, 720p, QVGA
    15 fps @ UXGA, 1080p, QXGA
    7 fps @ 2592 x 1944
•  Dimension (LxWxH): ca. 60 x 8 x 6.3 mm

Item 62858

Adapter Mini PCIe > M.2 Key E slot

•  Connector:
         1 x Mini PCIe male
         1 x 67 pin M.2 key E slot
•  Interface: USB 2.0 / PCIe
•  Form factor: Mini PCIe full size / half size
•  Supports M.2 modules in format 2242, 2230, 3042 and 3030 with
    key E or key A+E based on USB / PCIe
•  Maximum height of the components on the module: 1.5 mm
    application of double-sided assembled modules supported
•  Jumper for PCIe lane setting
•  Dimensions (LxW): ca. 54 x 30 mm

Item 62786

2.5″ Converter SATA Express / U.2 >
1 x M.2 / 1 x mSATA with Enclosure 9.5 mm

•  Connector:
         1 x U.2 SFF-8639 / SATA Express male
         1 x 67 pin M.2 key M slot
         1 x mSATA slot (half size / full size)
•  Interface: PCIe / SATA
•  Form factor: 2.5″
•  Supports M.2 modules in format 2280, 2260, 2242 and 2230 with
    key B or key B+M based on SATA or PCIe
•  Maximum height of the components on the module: 1.35 mm
    application of double-sided assembled modules supported
•  Supports NVM Express (NVMe) (only PCIe SSD)
•  Maximum power for modules: 3 A
•  Short circuit protection, over heating protection
•  ESD protection up to 2 kV
•  LED indicator
•  Dimensions (LxWxH): ca. 100 x 70 x 9.5 mm

Item 86203

Media Converter 1000Base-X SFP to SFP

•  Connector:
         2 x SFP slot for 1000Base-X SFP module
         (SFP modules not included)
•  Data transfer rate up to 1 Gb/s
•  6 LEDs for status monitoring
•  Power consumption: 2.5 W
•  Operating temperature: 0° ~ 50° C
•  Metal housing
•  Fanless
•  Dimensions (LxWxH): ca. 95 x 70 x 26 mm

Item 87708

Gigabit Ethernet Switch 8 Port + 1 SFP

•  Connector:
         8 x RJ45 female for 10/100/1000 Mb/s Base-T
         1 x SFP slot for 1 Gb/s SFP module
         (SFP module not included)
         1 x IEC C14 connector
•  Data transfer rate up to 1 Gb/s
•  Supports IEEE 802.3 / 802.3u / 802.3z / 802.3ab
•  LEDs for status monitoring
•  VLAN (port isolation or 1:1 mode) selectable by DIP switch
•  330 m long range mode with 10 Mb/s
•  Robust metal housing
•  Removable wallmount brackets
•  Fanless
•  Internal power supply
•  Power consumption: max. 10 W
•  Operating temperature: -20 °C ~ 60 °C
•  Dimensions (LxWxH): ca. 160 x 115 x 40 mm

Item 87704

Gigabit Ethernet Switch 4 Port + 1 SFP

•  Connector:
         4 x RJ45 female for 10/100/1000 Mb/s Base-T
         1 x SFP slot for 1 Gb/s SFP module
         (SFP module not included)
         1 x IEC C14 connector
•  Dimensions (LxWxH): ca. 125 x 109 x 32 mm
•  Features see 87708


Item 62788

Adapter SFF-8643 >
PCIe x4 with fixing plate

•  Connector:
         1 x SFF-8643
         1 x PCI Express x4, V3.0
         1 x 4 pin power connector
•  Bootable, from UEFI version 2.3.1
•  Supports NVM Express (NVMe)
•  Maximum output current: 4 A
•  Output voltage: 3.3 V
•  Short circuit protection, over heating protection
•  ESD protection up to 2 kV
•  Dimensions (LxWxH):
    adapter: ca. 85 x 45 x 15 mm
    fixing plate: ca. 95 x 70 x 10 mm

infothek
Contact Overview of the
last newsletters
Delock Homepage Subscribe
Newsletter
Cancel
Newsletter
DELOCK is a brand of the manufacturer
TRAGANT Handels- und Beteiligungs GmbH
Beeskowdamm 13/15
14167 Berlin / Germany
Commercial Register: HRB 45788
Berlin Charlottenburg
VAT.-Number: DE 156330245
WEEE-Reg.-No.: DE 89394995
All offered products are available, as long as stock lasts. All brand names listed here are registered trademarks of their respective companies. Changes, delivery times and errors are subject to change.