ProductosModuleCategoría completa12591 Delock IoT LoRa Radio Module 868 MHz 20 dBm TTL (3.3 V) pin header male > SMA jack

Delock IoT LoRa Radio Module 868 MHz 20 dBm TTL (3.3 V) pin header male > SMA jack

Número de elemento 12591 New
picture
picture

Descripción

This highly energy-efficient IoT LoRa radiomodule by Delock is suitable for LPWAN, M2M, IoT or Industry 4.0 applications. Via the UART TTL interface components such as sensors, controllers, GNSS trackers, LoRaWAN gateways etc. can be equipped with this LoRa compatible radio module. Due to the flexible output power of the module, a wide spectrum of antennas and thus a large transmission / reception range is possible.

The LoRa data are always transmitted encrypted in a secure radio network and thus remain protected from unauthorized access.

Energy efficiency
The IoT LoRa module supports four energy-saving modes and, with its very low power consumption (4 μA), is suitable for use with rechargeable batteries.

RF output power
There are four power levels available on the RF output of the IoT LoRa module for the antenna.

Forward Error correction (FEC)
The module can detect radio interference automatically and actively prevent transmission errors. This ensures error-free data transmission and secures the range of the transmission.


Especificación técnica

• Connectors:
  1 x SMA jack
  1 x 7 pin pin header male
• Pitch: 2.54 mm
• Chipset: Semtech SX1276
• Interface: UART TTL (3.3 V)
• FIFO: 2 x 512 byte
• Frequency range: 862 - 893 MHz
• Channels: 32
• Sensitivity: -146 dBm @ 2,4 Kbps
• Transmission power: 10 - 20 dBm
• Air data rate: 0.3, 1.2, 2.4, 4.8, 9.6, 19.2 Kbps
• Energy modes: (Normal, Wake-up, Power-saving, Sleep)
• Supports WOR (Wake On Radio)
• Supports FEC (Forward Error Correction)
• Power supply: 3.3 - 5.2 V
• Current consumption: 120mA@20dBm
• Operating temperature: -40 °C ~ 85 °C
• Relative humidity: 10 - 90 % (non condensing)
• Dimensions (LxWxH): ca. 47.8 x 21.0 x 14.2 mm
• Weight: ca. 6.7 g


Requisitos del sistema

• Antenna with SMA connector
• Controller with TTL (3.3 V) interface


Contenido del paquete

• Module


Paquete

• Box


Interface
Conector 1
• 1 x hembra SMA
Conector 2
• 1 x 7 pin pin header
Technical characteristics
Data flow control
• AUX
Conjunto de chips
• Semtech SX1276
Velocidades de transferencias de datos
• up to 115,2 Kb/s
FIFO
• 2 x 512 Byte
Frequency range
• 862 - 893 MHz
Impedanciaios
• 50 Ohm
Storage temperature
• -40 °C - 125 °C
Temperatura de funcionamiento
• -40 °C ~ 85 °C
Humidity
• 10 ~ 90 %
Interface
• UART
Power handling
• 100 mW
Data transmission
• Bi-directional
Voltaje
• 3,2 V - 5,2 V
Current consumption
• 4 µA - 120 mA
UART
• UART TTL
Physical characteristics
Weight
• 6.7 g
Thread length
• 11,0
Acabado del conector
• chapado en oro
Longitud
• 47,
Width
• 21 mm
Height
• 14,2 mm
Color
• green
Todos los nombres y símbolos aquí mencionados son propiedad de sus respectivos productores. Exceptuando errores, errores de impresión y cambios.

To the top