ProduktyModuleCelá kategorie12591 Delock IoT LoRa Radio Module 868 MHz 20 dBm TTL (3.3 V) pin header male > SMA jack

Delock IoT LoRa Radio Module 868 MHz 20 dBm TTL (3.3 V) pin header male > SMA jack

Číslo produktu 12591
picture
picture

Popis

This highly energy-efficient IoT LoRa radiomodule by Delock is suitable for LPWAN, M2M, IoT or Industry 4.0 applications. Via the UART TTL interface components such as sensors, controllers, GNSS trackers, LoRaWAN gateways etc. can be equipped with this LoRa compatible radio module. Due to the flexible output power of the module, a wide spectrum of antennas and thus a large transmission / reception range is possible.

The LoRa data are always transmitted encrypted in a secure radio network and thus remain protected from unauthorized access.

Energy efficiency
The IoT LoRa module supports four energy-saving modes and, with its very low power consumption (4 μA), is suitable for use with rechargeable batteries.

RF output power
There are four power levels available on the RF output of the IoT LoRa module for the antenna.

Forward Error correction (FEC)
The module can detect radio interference automatically and actively prevent transmission errors. This ensures error-free data transmission and secures the range of the transmission.


Specifikace

• Connectors:
  1 x SMA jack
  1 x 7 pin pin header male
• Pitch: 2.54 mm
• Chipset: Semtech SX1276
• Interface: UART TTL (3.3 V)
• FIFO: 2 x 512 byte
• Frequency range: 862 - 893 MHz
• Channels: 32
• Sensitivity: -146 dBm @ 2,4 Kbps
• Transmission power: 10 - 20 dBm
• Air data rate: 0.3, 1.2, 2.4, 4.8, 9.6, 19.2 Kbps
• Energy modes: (Normal, Wake-up, Power-saving, Sleep)
• Supports WOR (Wake On Radio)
• Supports FEC (Forward Error Correction)
• Power supply: 3.3 - 5.2 V
• Current consumption: 120mA@20dBm
• Operating temperature: -40 °C ~ 85 °C
• Relative humidity: 10 - 90 % (non condensing)
• Dimensions (LxWxH): ca. 47.8 x 21.0 x 14.2 mm
• Weight: ca. 6.7 g


Systémové požadavky

• Antenna with SMA connector
• Controller with TTL (3.3 V) interface


Obsah balení

• Module


Balení

• Box


Interface
Konektor 1
• 1 x SMA samice
Konektor 2
• 1 x 7 pin pin header
Technical characteristics
Data flow control
• AUX
Chipsetem
• Semtech SX1276
Rychlost přenosu dat
• up to 115,2 Kb/s
FIFO
• 2 x 512 Byte
Frequency range
• 862 - 893 MHz
Impedance
• 50 Ohm
Storage temperature
• -40 °C - 125 °C
Provozní teplota
• -40 °C ~ 85 °C
Humidity
• 10 ~ 90 %
Interface
• UART
Power handling
• 100 mW
Data transmission
• Bi-directional
Napětí
• 3,2 V - 5,2 V
Current consumption
• 4 µA - 120 mA
UART
• UART TTL
Physical characteristics
Weight
• 6.7 g
Thread length
• 11,0
Konektor s povrchovou úpravou
• pozlacen
Délka
• 47,
Width
• 21 mm
Height
• 14,2 mm
Barva
• green
Všechny názvy a symboly zde uvedené jsou vlastnictvím výrobce.
Tiskové chyby, změny a chyby v datech vyhrazeny.

To the top