Delock Adattatore USB 2.0 a 4 porte Seriali RS-422/485

Articolo n. 87587
87587 Delock Adattatore USB 2.0 a 4 porte Seriali RS-422/485
87587
87587
87587
87587
87587 Delock Adattatore USB 2.0 a 4 porte Seriali RS-422/485 small 1
87587 small 2
87587 small 3
87587 small 4
87587 small 5
Strumento adattatore

Descrizione

Questo adattatore Delock consente di collegare fino a quattro dispositivi seriali attraverso una porta USB di Tipo-A.


Specifiche

  • Connettori:
    1 x USB 2.0 Tipo-B femmina >
    4 x RS-422/485 DB9 seriale maschio
    1 x jack 5 V CC
  • Chipset: FT4232HL, SP3078EE
  • 4 x switch DIP: RS-422/485 impostazione di funzionamento
  • Pin header interno: terminator switch ponticello on / off
  • Connettore seriale con dadi
  • Velocità di trasferimento dati fino a 1 Mbps
  • LED per indicazione di attività TxD / RxD
  • Riconoscimento e commutazione automatici tra RS-422 e RS-485
  • Protezione ESD ±15 kV su tutti i pin di segnale
  • Montaggio a parete integrato nella custodia
  • Consumo:
    Funzionamento: ≤ 143 mA / 715 mW
    standby: ca. 92 mA / 460 mW
  • Ulteriori I/O e IRQ non sono richiesti
  • Presa DC per alimentatore opzionale
  • Temperatura di esercizio: 0 °C ~ 70 °C
  • Dimensioni (LxPxA): ca. 172 x 65 x 23 mm


Specifica del connettore di alimentazione

  • 5 V, massa all'esterno, più all'interno
  • Dimensioni:
    interno: ø ca. 2,1 mm
    esterno: ø ca. 5,5 mm
    lunghezza: ca. 9,5 mm


Requisiti di sistema

  • Linux Kernel 2.6 o superiore
  • Windows Server 2012/Server 2012 R2/Server 2016
  • Windows Vista/Vista-64/7/7-64/8.1/8.1-64/10/10-64/11
  • PC o laptop con porta USB Tipo-A libera


Contenuto della confezione

  • USB 2.0 per 4 x seriale RS-422/485 adattatore
  • Cavo USB 2.0
  • 8 x ponte
  • CD contenente il driver
  • Manuale utente


Pacchetto

  • White Box

General
Function
• Converter
• Programmable EEPROM
Mounting type
• Montaggio a parete
Specification
• RS-422 / RS-485 (EIA / TIA)
• UHCI/OHCI/EHCI
Supported operating system
• Linux Kernel 2.6 o superiore
• Windows 10 32-bit
• Windows 10 64-bit
• Windows 7 32-Bit
• Windows 7 64-Bit
• Windows 8.1 32-Bit
• Windows 8.1 64-Bit
• Windows Server 2012 R2
• Windows Server 2016
• Windows Server 2019
• Windows 11
Indicatore LED
• 4 x RXD
• 4 x TXD
Protection
• Failsafe protection for open, shorted or terminated lines
DIP Switches
• 8 x
Interface
Connettore 1
• 1 x USB Type-B
Connettore 2
• 4 x Seriell DB9 Stecker mit Muttern
Technical characteristics
Chipset
• FTDI FT2232HL
• SP3078EE
Data transfer rate
• RS-422 / RS-485 up to1 Mbps
FIFO
• 4 x 2 KByte RX
• 4 x 2 KByte TX
Impedance
• 120 ‎Ω
Jumper
• 8 x
Temperatura di esercizio
• 0 °C ~ 70 °C
Maximum power consumption
• 305 mW
Signal transmission
• Tx+, Tx-, Rx+, Rx-, GND
Data transmission
• asynchronous
• Bi-directional
• Half duplex
• full duplex
• differential
Voltage
• Alimentato da bus USB
UART
• USB to serial UART
Resistor
• Terminalresistor 120 Ω ON/OFF
Support
• 256 Multidrop Nodes
Data bits
• 7, 8
Physical characteristics
Ferrite core
• 1 x
Materiale custodia
• metallo
Cable colour
• nero
Lunghezza
• 172 mm
Width
• 65 mm
Height
• 23 mm
Colour
• grigio / bianco / blu
Overvoltage protection
• ±8 kV EN / IEC 61000-4-2 Scarico contatto
• 15 kV RS-422 / RS-485
Chipset manufacturer More information can be obtained from the chipset manufacturer at the following website:
More informations about this product

Microsoft WHQL certified
 
Tutti i nomi e i simboli citati qui sono di proprietà dei rispettivi produttori. Salvo errori di stampa, modifiche ed errori.