Delock Adapter cable USB Type-A to Serial RS-232 RJ12 with ESD protection APC 2 m

Nr. 66736
66736 Delock Adapter cable USB Type-A to Serial RS-232 RJ12 with ESD protection APC 2 m
66736
66736
66736 Delock Adapter cable USB Type-A to Serial RS-232 RJ12 with ESD protection APC 2 m small 1
66736 small 2
66736 small 3
Intrument de adaptare Instrument de cablu

Descriere scurta

This USB to serial RS-232 RJ12 adapter cable by Delock is suitable for controlling and monitoring the rack power distribution units and rack transfer switches from APC.

Compatible Devices:
Rack Power Distribution Units:
AP78xx, AP79xx, AP86xx, AP88xx, AP89xx
Rack Automatic Transfer Switches:
AP7752, AP7752, AP7730, AP7732, AP7721, AP7723


Specification

  • Connectors:
    1 x USB 2.0 Type-A male
    1 x Serial RS-232 RJ12 plug
  • Chipset: FTDI FT231X
  • Plug & Play
  • FIFO: 512 Byte - TX
  • FIFO: 512 Byte - RX
  • Compatible with USB 3.0, USB 2.0, and USB 1.1 full speed 12 Mbps
  • Data transfer rate up to 230.4 Kb/s
  • Signals: GND(2), RXD(3), TXD(4), GND(5)
  • ESD protection IEC 61000-4-2
    HCP & VCP: ±4 kV
    Air Discharge: ±8 kV
    Contact Discharge: ±4 kV
  • Colour: black
  • Cable length incl. connectors: ca. 2.0 m
  • Suitable for various devices from APC


Cerinte de sistem

  • Windows 8.1/8.1-64/10/10-64/11
  • PC or laptop with a free USB Type-A port


Pachetul contine

  • Adapter cable USB 2.0 Type-A to RS-232 RJ12


Pachet

  • Pungă din plastic cu închidere tip fermoar

General
Specification
• RS-232 (EIA / TIA)
• USB 2.0
Supported operating system
• Windows 10 32-bit
• Windows 10 64-bit
• Windows 8.1 32-Bit
• Windows 8.1 64-Bit
Interface
Conector 1
• 1 x USB 2.0 Tip-A tată
Conector 2
• 1 x RJ12 tată
Technical characteristics
Chipset
• FTDI FT231XS
Data transfer rate
• bis zu 230,4 Kbps
FIFO
• 2 x 512 Byte
Signal transmission
• TxD, RxD und GND
UART
• USB to serial UART
Physical characteristics
Cable length incl. connector
• 2 m
Colour
• negru
Overvoltage protection
• ±8 kV EN / IEC 61000-4-2 Descărcare contacte
• ±4 kV EN / IEC 61000-4-2 Contact Discharge
• ±4 kV EN / IEC 61000-4-2 VCP & HCP
Toate denumirile și simbolurile menționate aici sunt proprietatea producătorului respectiv. Erorile de imprimare, modificările și erorile sunt o excepție.