Delock Converter RS-232 > RS-232 with 3 kV Isolation 600 W power surge

Numer artykułu 62500
62500 Delock Converter RS-232 > RS-232 with 3 kV Isolation 600 W power surge
62500
62500
62500
62500
62500 Delock Converter RS-232 > RS-232 with 3 kV Isolation 600 W power surge small 1
62500 small 2
62500 small 3
62500 small 4
62500 small 5
Narzędzie Adaptery

Opis

This RS-232 to RS-232 isolator by Delock is designed to protect the connected components from electrostatic discharges and power surge. In addition, the galvanic isolation avoids data transmission errors by uneven ground voltages. Power can be provided through the serial interface or the included power supply. DIN rail mounting is supported.


Specyfikacja

  • Connector:
    Host: 1 x D-Sub 9 pin Serial RS-232 female
    Device: 1 x D-Sub 9 pin Serial RS-232 male
    1 x DC 1.3 x 3.5 mm female
  • Data transfer rate up to 1 Mbps
  • Data Bit: 5, 6, 7, 8
  • Stopp Bit: 1, 1.5, 2
  • Parity: None, Even, Odd, Space, Mark
  • Signals: TXD, RXD, CTS, RTS, DCD, DSR, DTR
  • LED indicators for status TX / RX and power supply
  • Galvanic isolation 3 kV (optical isolation)
  • 600 W power surge for the RS-232 interfaces
  • 600 W power surge at the DC Connector
  • ± 15 kV ESD protection for all signal pins
  • Power supply RS-232 interface pin 9: 12 V (optional)
  • Power supply: 10 - 30 V
  • Power consumption: ca. 50 mA
  • Operating temperature: - 30 °C ~ 75 °C
  • Relative humidity: 5 ~ 95 % (not condensing)
  • Storage temperature: - 40 °C ~ 85 °C
  • Housing material: plastic
  • Dimensions (LxWxH): ca. 88 x 54 x 22 mm
  • Accessories for mounting on 35 mm DIN rails


Specyfikacje źródła zasilania

  • Wall power supply
    Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.48 A
    Output: 12 V / 1.6 A
  • Ground outside, plus inside
  • Dimensions:
    inside: ø ca. 1.3 mm
    outside: ø ca. 3.5 mm
    length: ca. 9.5 mm


Wymagania systemowe

  • Devices with RS-232 interfaces


Zawartość opakowania

  • Converter
  • Power supply
  • Mounting set for DIN rail
  • User manual


Opakowanie

  • Box

General
Funkcja
• optical isolation
Mounting type
• DIN rail 35 mm
Specyfikacja
• RS-232 (EIA / TIA)
Supported operating system
• Kompatybilny z każdym systemem operacyjnym, do instalacji nie wymaga się żadnych sterowników
Wskaźnik LED
• PWR / RXD / TXD
Protection
• ESD (Electrostatic Discharge)
• Surge Protection 600 W
Interface
Złącze 1
• 1 x męski szeregowy RS-232 DB9
Złącze 2
• 1 x żeński szeregowy RS-232 DB9
złącze 3
• 1 x gniazdo prądu sałego
Technical characteristics
Szybkość transmisji danych
• up to 921.6 Kbps
Temperatura robocza
• -30 °C ~ 75 °C
Humidity
• 5 ~ 95 %
Signal transmission
• TxD, RxD, RTS, CTS, DTR, DSR, DCD
Data transmission
• asynchronous
• full duplex
Napięcie
• Power supply: 10 - 30 V
• Optional PIN 9: 12 V
Current consumption
• 50 mA
Physical characteristics
Materiał obudowy
• Plastik
Typ śrubek
• #4-40 UNC
Długość
• 80 mm
Width
• 54 mm
Height
• 22 mm
Kolor
• czarny
Overvoltage protection
• 15 kV
Izolator
• 3 kV
Power supply
Type
• Euro wall power supply
Connector
• DC wtyk męski 3,5 mm x 1,35 mm
Wszelkie pojawiające się tutaj nazwy i znaki należą do ich odpowiednich właścicieli. Błędy drukarskie, zmiany & pomyłki zastrzeżone.