Delock Converter RS-232 > RS-232 with 3 kV Isolation 600 W power surge

N° produit 62500
62500 Delock Converter RS-232 > RS-232 with 3 kV Isolation 600 W power surge
62500
62500
62500
62500
62500 Delock Converter RS-232 > RS-232 with 3 kV Isolation 600 W power surge small 1
62500 small 2
62500 small 3
62500 small 4
62500 small 5
Outil d'adaptation

Description

This RS-232 to RS-232 isolator by Delock is designed to protect the connected components from electrostatic discharges and power surge. In addition, the galvanic isolation avoids data transmission errors by uneven ground voltages. Power can be provided through the serial interface or the included power supply. DIN rail mounting is supported.


Spécifications techniques

  • Connector:
    Host: 1 x D-Sub 9 pin Serial RS-232 female
    Device: 1 x D-Sub 9 pin Serial RS-232 male
    1 x DC 1.3 x 3.5 mm female
  • Data transfer rate up to 1 Mbps
  • Data Bit: 5, 6, 7, 8
  • Stopp Bit: 1, 1.5, 2
  • Parity: None, Even, Odd, Space, Mark
  • Signals: TXD, RXD, CTS, RTS, DCD, DSR, DTR
  • LED indicators for status TX / RX and power supply
  • Galvanic isolation 3 kV (optical isolation)
  • 600 W power surge for the RS-232 interfaces
  • 600 W power surge at the DC Connector
  • ± 15 kV ESD protection for all signal pins
  • Power supply RS-232 interface pin 9: 12 V (optional)
  • Power supply: 10 - 30 V
  • Power consumption: ca. 50 mA
  • Operating temperature: - 30 °C ~ 75 °C
  • Relative humidity: 5 ~ 95 % (not condensing)
  • Storage temperature: - 40 °C ~ 85 °C
  • Housing material: plastic
  • Dimensions (LxWxH): ca. 88 x 54 x 22 mm
  • Accessories for mounting on 35 mm DIN rails


Spécifications de la source d'alimentation

  • Wall power supply
    Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.48 A
    Output: 12 V / 1.6 A
  • Ground outside, plus inside
  • Dimensions:
    inside: ø ca. 1.3 mm
    outside: ø ca. 3.5 mm
    length: ca. 9.5 mm


Configuration système requise

  • Devices with RS-232 interfaces


Contenu de l’emballage

  • Converter
  • Power supply
  • Mounting set for DIN rail
  • User manual


Emballage

  • Box

General
Fonction
• optical isolation
Mounting type
• DIN rail 35 mm
Spécifications techniques
• RS-232 (EIA / TIA)
Supported operating system
• Indépendant du système d’exploitation, pas besoin d’installer un pilote
Témoin DEL
• PWR / RXD / TXD
Protection
• ESD (Electrostatic Discharge)
• Surge Protection 600 W
Interface
Connecteur 1
• 1 x série RS-232 DB9 mâle
Connecteur 2
• 1 x série RS-232 DB9 femelle
connecteur 3
• 1 x prise CC
Technical characteristics
Débit de données
• up to 921.6 Kbps
Température de fonctionnement
• -30 °C ~ 75 °C
Humidity
• 5 ~ 95 %
Signal transmission
• TxD, RxD, RTS, CTS, DTR, DSR, DCD
Data transmission
• asynchronous
• full duplex
Tension
• Power supply: 10 - 30 V
• Optional PIN 9: 12 V
Current consumption
• 50 mA
Physical characteristics
Matériau du boîtier
• Plastique
Type de vis
• #4-40 UNC
Longueur
• 80 mm
Width
• 54 mm
Height
• 22 mm
Couleur
• noir
Overvoltage protection
• 15 kV
Isolateur
• 3 kV
Power supply
Type
• Euro wall power supply
Connector
• CC mâle 3,5 mm x 1,35 mm
Tous les noms et images mentionnés ici sont la propriété de leur fabricant respectif. Sous réserve d’erreurs et de modifications.