Delock WLAN Áram konnektor átalakító MQTT energiafogyasztás követővel

Tételszám 11827
11827 Delock WLAN Áram konnektor átalakító MQTT energiafogyasztás követővel
11827
11827
11827
11827
11827 Delock WLAN Áram konnektor átalakító MQTT energiafogyasztás követővel small 1
11827 small 2
11827 small 3
11827 small 4
11827 small 5

Leírás

Ez a Delock típusú csatlakozó átalakító egy gombbal vagy WLAN segítségével kontrollálható. A beépített Tasmota firmware segítségével, az átalakító könnyen beépíthető meglévő otthoni rendszerekbe pl. IoT vagy M2M. A web-es csatlakozónak köszönhetően, az áramforrás beállítható egy felhő vagy applikációtól függetlenül is.

Megfigyeli az energiafogyasztást
Egy pillanat alatt, a konnektor aktuális energiafogyasztása meghatározható. Ez megfelelő energiafogyasztást és a költségek megfelelő alakítását teszi lehetővé, és szokatlan működési körülmények azonosíthatók.


Műszaki adatok

  • Csatlakozó:
    1 x csatlakozó CEE 7/4
    1 x foglalat CEE 7/3
  • Kapcsoló gomb 2-színű LED jelzővel
  • Web-es csatlakozós
  • Beállítható időkontrol
  • Energia megfigyelés:
    Feszültség, amperszám és áram
    Fogyasztás kilowattórában
  • Támogatja a MQ Telemetry Transport (MQTT), Domoticz, Home Assistant használatát
  • Támogatja a Alexa használatát
  • Lapkakészlet: ESP8285
  • Megfelel az IEEE 802.11b/g/n szabványoknak
  • Frekvenciatartomány: 2,4 GHz
  • Átviteli teljesítmény (EIRP): 100 mW
  • Beltéri használatra alkalmas
  • Energiafogyasztás: max. 1,5 W
  • Bementi feszültség: 230 V
  • Árammennyiség: max. 16 A
  • Kimeneti teljesítmény: max. 2500 W
  • Méret a csatlakozódugó nélkül: átmérő kb. 51 mm, magasság kb. 45 mm


Rendszerkövetelmények

  • WLAN Gateway


A csomag tartalma

  • WLAN áram csatlakozó átalakító
  • Használati utasítás


Csomag

  • Retail Box

Technical characteristics
Frequency range
• 2.4 GHz band
Physical characteristics
Diameter
• 51 mm
Height
• 45 mm
Szín
• fehér
What is the user name for the web interface if a password has been assigned? The default user name is "admin".
The energy monitoring is not accurate. Due to component tolerances and manufacturing, the device allows only an approximate measurement of the power. If necessary, e.g. after a reset, it is possible to obtain a better result by calibration: https://tasmota.github.io/docs/Power-Monitoring-Calibration/
Alternatively you can use a rough estimate with following console commands: CurrentCal 3300, PowerCal 10000, VoltageCal 1650.
How to flash the device to the latest Tasmota version? For the socket switch we use a version of Tasmota, that we have adjusted and tested. Please understand that we can only support this Tasmota version.
What are the changes in firmware 6.7.1? • Fix WeMo emulation for 1G echo and 2G echo dot.
• Add command "time" to disable NTP and set UTC time.
• Removed support for WPS.
What are the changes in firmware 7.2? • Change default GUI to dark theme
• New Arduino Core version
• The LED is now controlled in the same way as Tasmota
• For the hardware configuration a user template is now used.
We recommend you save the device settings and do a "Reset 6" as console command. This will restore the default settings, but keep the WIFI SSID and Password.
Weaker Wi-Fi signal after firmware upgrade The Wi-Fi calibration needs to be deleted to force the device to re-calibrate Wi-Fi after it restarts.
1. Run "reset 3" in the Console (your existing settings will not be affected).
2. The device will restart
3. Cycle the power on the device (unplug and plug it).
Wi-Fi calibration will not be done unless the device performs a cold boot from power up.
Configuration options In case of problems, the following switches can help:
SetOption55 mDNS service 0 = disable 1 = enable
SetOption19 Set Home Assistant discovery protocol 0 = use Tasmota integration (default) 1 = use MQTT discovery
SetOption109 0 = (default) 1 = force gen1 Alexa mode, for Echo Dot 2nd gen devices only
How to reset the energy values? You can enter these console commands to reset the values for today1 / yesterday2 / total3:
"EnergyReset1 0" / "EnergyReset2 0" / "EnergyReset3 0".
The device does not connect to the Wi-Fi If your device does not connect to your Wi-Fi and you've made sure the Wi-Fi credentials are correct, it is caused by using special chars or white spaces in your SSID or Password of your Wi-Fi. Remove them and try again. Other reason can be using an SSID longer than the allowed 32 characters.
Az itt megemlített nevek és szimbólumok a megfelelő gyártók tulajdonát képezik (a változtatások, nyomtatási hibák és egyéb hibák kivételt jelentenek).