|
Item 89603
PCI Express x4 Card >
1 x internal USB 3.1 Gen 2 key A 20 pin female
• Connectors:
internal:
1 x SuperSpeed USB 10 Gbps
(USB 3.1 Gen 2) key A 20 pin female
1 x SATA 15 pin power plug
1 x PCI Express x4, V3.0
• Chipset: Asmedia ASM2142
• Data transfer rate up to SuperSpeed USB 10 Gbps
• Power supply via PCI Express interface or via SATA
15 pin power connector
• Supports eXtensible Host Controller Interface (xHCI)
specification 1.1
• Compliant with USB Attached SCSI Protocol (UASP) Rev. 1.0
|
|
|
Item 89606
PCI Express x4 Card >
1 x external USB Type-C™ female
with PD function max. 93 Watt
+ 1 x external USB 3.1 Type-A female
• Connectors:
external:
1 x SuperSpeed USB 10 Gbps
(USB 3.1 Gen 2) USB Type-C™ female
(data transmission + Power Delivery)
1 x SuperSpeed USB 10 Gbps
(USB 3.1 Gen 2) Type-A female
internal:
1 x 8 pin power female
1 x PCI Express x4, V3.0
• Chipset: Asmedia ASM2142 + Texas Instruments TPS25741
• Data transfer rate up to SuperSpeed USB 10 Gbps
• Downwards compatible to USB 3.0, USB 2.0, USB 1.1
• Electrical power per port:
USB Type-C™: max. 93 Watt (20 V / 4.64 A);
60 Watt (20 V / 3 A); 36 Watt (12 V / 3 A)
USB Type-A: max. 4.5 watt (5 V / 0.9 A)
• Supports USB Power Delivery 2.0
• Supports eXtensible Host Controller Interface (xHCI)
specification 1.1
|
|
|
Item 62960
Adapter USB 2.0 Type-A male >
1 x Serial RS-232 RJ45 male
• Connectors:
1 x USB 2.0 Type-A male
1 x serial RS-232 RJ45 male
• Chipset: FTDI FT232RL
• Signals: RTS(1), DSR(2), RXD(3), GND(4), GND(5), TXD(6),
DTR(7), CTS(8)
• Compatible with USB 3.0, USB 2.0, and USB 1.1 full speed 12 Mbps
• Data transfer rate up to 230.4 Kbps
• Suitable for various CISCO devices
• Cable length: ca. 1.8 m
|
|
|
Item 62966
Adapter USB 3.0 > 4 x Gigabit LAN
• Connectors:
1 x USB 3.0 Type-B female
4 x Gigabit LAN RJ45 jack
1 x DC 5.5 x 2.1 mm female
• Chipset: Realtek RTL8153
• Data transfer rate up to Gigabit Ethernet 1000 Mbps
(Half/Full Duplex)
• Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
• Supports IEEE 802.3x full duplex flow control
• Supports IEEE 802.1P layer 2 priority encoding
• Supports IEEE 802.1Q Virtual LAN (VLAN)
• Supports IEEE 802.3az (Energy Efficient Ethernet)
• LED indicator
• USB bus powered
• Robust metal housing
• Dimensions (LxWxH): ca. 73 x 72 x 23 mm
|
|
|
|
Item 89601
Antenna Extension N Plug >
N Jack Stainless steel flexible
• Connectors:
1 x N plug
1 x N jack
• Impedance: 50 Ohm
• VSWR: 1.5
• Adapter attenuation:
1 GHz: 0.26 dB
2 GHz: 0.45 dB
• Frequency range: 0 Hz - 6 GHz
• Operation temperature: -65 °C ~ 165 °C
• Housing: stainless steel SUS304
• Maximum bending angle: 90°
• Weight: ca. 0.25 kg
• Length incl. connectors: ca. 13.9 cm
• Diameter: ca. 2.0 cm
|
|
|
Item 65844
USB Type-C™ PD Adapter
with OLED indicator for Voltage and Ampere – bidirectional
• Connectors:
1 x USB Type-C™ male
1 x USB Type-C™ Power Delivery female
• Double row OLED display
• Supports charging function and data transfer in both directions
• Voltage and ampere indication at the same time
• Data transfer rate up to SuperSpeed USB 5 Gbps
• For direct voltage up to 20 V
• Ampere indication up to 3.4 A
• Dimensions incl. connector (LxWxH): ca. 62 x 20 x 8 mm
|
|
|
Item 83717
Cable SuperSpeed USB 10 Gbps
(USB 3.1 Gen 2) Type-A male >
USB Type-C™ male with screw on topk
• Connectors:
1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) Type-A male
1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™
male with screw on top
• Host = USB Type-A; Device = USB Type-C™
• Screw type: M2 x 0.4
• Cable gauge:
30 AWG data line
24 AWG power line
• Output current: up to 3 A
• Resistor: 56 kΩ
• Cable diameter: ca. 4.5 mm
• Data transfer rate up to SuperSpeed USB 10 Gbps
• Length incl. connectors: ca. 1 m
|
|
|
Item 83718
Cable SuperSpeed USB 10 Gbps
(USB 3.1 Gen 2) Type-A male >
USB Type-C™ male with screws on the sides
• Connectors:
1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) Type-A male
1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™
male with screws on the sides
• Host = USB Type-A; Device = USB Type-C™
• Screw type: M2 x 0.4
• Screw distance: 15 mm
• Cable gauge:
30 AWG data line
24 AWG power line
• Output current: up to 3 A
• Resistor: 56 kΩ
• Cable diameter: ca. 4.5 mm
• Data transfer rate up to SuperSpeed USB 10 Gbps
• Length incl. connectors: ca. 1 m
|
|
|
Item 83719
Cable SuperSpeed USB 10 Gbps
(USB 3.1 Gen 2) USB Type-C™ male >
USB Type-C™ male with screw on top
• Connectors:
1 x SuperSpeed USB 10 Gbps
(USB 3.1 Gen 2) USB Type-C™ male with screw on top
1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™
male with screw on top
• Screw type: M2 x 0.4
• Cable gauge:
30 AWG data line
24 AWG power line
• Output current: up to 3 A
• Cable diameter: ca. 4.5 mm
• Data transfer rate up to SuperSpeed USB 10 Gbps
• Length incl. connectors: ca. 1 m
|
|
|
Item 83720
Cable SuperSpeed USB 10 Gbps
(USB 3.1 Gen 2) USB Type-C™ male >
USB Type-C™ male with screws on the sides
• Connectors:
1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™
male with screws on the sides
1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™
male with screws on the sides
• Screw type: M2 x 0.4
• Screw distance: 15 mm
• Cable gauge:
30 AWG data line
24 AWG power line
• Output current: up to 3 A
• Cable diameter: ca. 4.5 mm
• Data transfer rate up to SuperSpeed USB 10 Gbps
• Length incl. connectors: ca. 1 m
|
|
 |
