|
Item 11348
Switch 2 to 1 KVM with USB and Audio
• Connector:
2 x VGA 15 pin female (connection to PC 1 and PC 2)
1 x VGA 15 pin female (monitor or beamer)
2 x USB 2.0 type A female (keyboard and mouse)
2 x USB 2.0 type B female (connection to PC 1 and PC 2)
2 x 3.5 mm stereo jack (1 x speaker, 1 x microphone)
4 x 3.5 mm stereo jack (speaker and microphone connection
to PC 1 and PC 2)
1 x PS/2 female (keyboard)
1 x DC power
1 x button with LED indicator for PC 1 or PC 2
• Switching via button or Hotkey (keyboard Scroll Lock)
• Scan interval: 8 sec.
• Resolution: max. 1920 x 1440
• Bandwidth: 250 MHz
• USB Bus Power, for the switch there is no additional power
supply needed (for connection to a notebook there may not
be enough power so that you need an additional power supply
DC 5 V / 0.5 – 1.0 A)
• OS independent, no driver installation necessary
• Dimension of box incl. connector (LxWxH): ca. 12 cm x 9 cm x 3 cm
|
|
|
Item 87618
Parallel Switch Sub-D 25 pin 2-port manual
• Input: 2 x parallel Sub-D 25 pin female
• Output: 1 x parallel Sub-D 25 pin female
• Female port with screw nuts
• 2 mechanical buttons
• Metal housing
• Dimension (LxWxH): ca. 12.3 cm x 9.2 cm x 3 cm
|
|
|
Item 86206
SFP Module 1000Base-T RJ45
• For Copper network cables (Cat.5e, 100 m)
• RJ45 female
• Transmission rate up to 1.25 Gbit/s
• 10/100/1000 Mbps with a SGMII interface
• 1000 Mbps with a SERDES Interface
• Compatible to SFP MSA and SFF-8472
• Operating temperature: 0 to +70° C
• On a projectspecific basis, the module can be programmed
compatible with switches from various
manufacturers
|
|
|
Item 18203
Protection box for 3.5″ HDD
• Suitable for 1 x 3.5″ SATA HDD
• Opening for SATA 22 pin connector
• Stackable
• Material: plastic
|
|
|
Item 86214
Dual WLAN antenna MHF/U.FL compatible 802.11 a/b/g/n -4 dBi 134 mm internal PIFA
• WLAN antenna internal
• PIFA (Planar Inverted F-Shaped Antenna)
• Connector: miniature RF coaxial connector MHF (I-PEX), U.FL
(Hirose) compatible
• Cable length: 134 mm
• Cable diameter: 1.13 mm
• Cable type: coaxial
• Frequency range: 2.400 ~ 2.500 GHz, 5.150 ~ 5.875 GHz
• Impedance: 50 Ohm
• Peak gain: < 1,6 dBi
• Average gain: > -4 dBi
• Operating temperature: -10 °C ~ 55 °C
• VSWR: 2.5 : 1 max.
• Dimension (LxWxH): 21.5 mm x 6 mm x 7 mm
|
|
|
Item 86213
Keystone Mounting for enclosures
• One Keystone Port 19.2 x 14.9 mm
• Integrated name plate
• Two mounting holes for screws, spacing 28.9 mm
• Material: Die cast zinc
• Dimensions (LxWxH): 9.8 mm x 19.1 mm x 35.5 mm
|
|
|
Item 86301
Keystone module BNC female to BNC female
• Connector: BNC female to BNC female
• Impedance 50 Ohm
• For Keystone ports with 19.2 mm x 14.9 mm
• Dimensions (LxWxH): 32.5 mm x 18.0 mm x 22.3 mm
|
|
|
Item 86311
Keystone module RCA female to F female gold plated red
• Connector: RCA female (red) to F female
• Gold-plated contacts
• For Keystone ports with 19.2 mm x 14.9 mm
• Length in front of the panel: 8.5 mm
• Dimensions (LxWxH): 25.8 mm x 16.3 mmx 22.3 mm
|
|
|
Item 86319
Keystone module USB 3.0 A female to USB 3.0 A female
• Connector: USB 3.0 A female to USB 3.0 A female
• For Keystone ports with 19.2 mm x 14.9 mm
• Dimensions (LxWxH): 35.2 mm x 17.1 mm x 22.3 mm
|
|
|
Item 86207
Keystone Surface Mounted Box 2 Port
• Two Keystone ports 19.2 x 14.9 mm
• Cable routing 180°
• Integrated name plate
• Dimensions (LxWxH): ca. 59.0 x 61.5 x 28.5 mm
|
|
|
Item 86212
Keystone Mounting for DIN rail
• One Keystone Port 19.2 x 14.9 mm
• Mounting for 35 mm DIN rail
• Stackable
• Integrated name plate
• Dimensions (LxWxH): 65.0 x 18.0 x 78.5 mm
|
|
|
Item 43260
19″ Keystone Patchpanel 24 Port
• 24 Keystone ports 19.2 mm x 14.9 mm
• For mounting in 19″ racks, 1 HE
• Printed name plate
• Revolvable strain relief
• Dimensions (LxWxH): ca. 91.0 mm x 482.0 mm x 44.0 mm
|
|
|
Item 86215
Media Converter 100Base-FX SC 1310 nm 20 km
• For Single-Mode-Fiber, 1310 nm wavelength
• Distance up to 20 km with 9/125 µm fiber
• SC Duplex connector
• RJ-45 connector for 10/100 Base-T
• Transmission rate up to 100 Mb/s
• 6 LEDs for status monitoring
• DIP-Switch for configuration of LFP (Link Fault Pass Through),
Half- or Full-Duplex, 10 or 100 Mb/s mode
• Power supply with 5 V included
• Power consumption: 2.5 W
• Dimensions (LxWxH): ca. 95 mm x 70 mm x 26 mm
|
|
|
Item 89355
PCI Express Card to 5 x external + 2 x internal USB 3.0
• Chipset: 2 x VLI
• External: 5 x USB 3.0 type A female
• Internal: 2 x USB 3.0 type A female
1 x Molex 4 pin power connector
1 x PCI Express x1, V2.0
|
|
|
Item 18202
Holder for 3.5″ or 2x 2.5″ HDDs
• Suitable for 1 x 3.5″ HDD or 2 x 2.5″ HDD
• Stackable
• Plastic holders
|