If this email should not be displayed properly, please click here Version CW 20-2015

Item 83609

Cable USB 2.0 type A + Micro-B combo male to USB 2.0 type A female OTG

USB cable with combination connector type A and Micro-B. Can be used as USB extension or OTG connecting cable.

•  USB 2.0 type A + Micro-B combo male
•  USB 2.0 type A female
•  Connector combination between USB A and Micro-B,
    Micro-B can be slid out and locked
•  USB 2.0 cable specification
•  OTG function (On-The-Go)
•  Cable gauge: 28 AWG
•  Gold-plated connector
•  Data transfer rate up to 480 Mb/s
•  Cable diameter: ca. 3.8 mm
•  Cable length: ca. 20 cm (incl. connector)

Other cable lengths:

0.5 m  Item 83610 ,  1 m  Item 83611


Item 83612

Cable USB 2.0 Power Sharing type A + Micro-B combo male to USB 2.0 type Micro-B male OTG

USB cable with combination connector type A and Micro-B. Can be used as data and charging cable or for power sharing.

•  USB 2.0 type A + Micro-B combo male
•  USB 2.0 type Micro-B male
•  Connector combination between USB A and Micro-B,
    Micro-B can be slid out and locked
•  USB 2.0 cable specification
•  OTG function (On-The-Go)
•  Cable gauge: 28 AWG
•  Gold-plated connector
•  Data transfer rate up to 480 Mb/s
•  Cable diameter: ca. 3.8 mm
•  Cable length: ca. 20 cm (incl. connector)

Other cable lengths:

0.5 m  Item 83613 ,  1 m  Item 83614



Item 83573

Data- and power cable USB 2.0 A male to Micro USB-B male with LED indication

Charging of a device via Micro USB connector. Charging status will be indicated through the LED.

•  USB 2.0 type A male > Micro USB 2.0 type B male
•  LED indicator:
    1. Lights up red: rechargeable battery will be charged
    2. Lights up blue: rechargeable battery charged
•  Cable gauge: 28 AWG
•  Cable length: ca. 1 m (incl. connector)

Item 83648

Cable MHL 3.0 male to High Speed HDMI A
male 4K

For playback of multimedia content of a MHL compatible device to a display or TV with MHL support.

•  MHL 3.0 USB type Micro-B 5 pin male
•  High Speed HDMI A 19 pin male
•  MHL 3.0 (Mobile High-Definition Link) specification
•  Downwards compatible to MHL 1.0 and 2.0
•  Cable gauge:
    28 AWG data line
    24 AWG power line
•  Copper conductor
•  Triple shielded cable
•  Transfer of audio- and video signals
•  Supports a resolution up to 3840 x 2160 @ 30 Hz
    (depending on the system and the connected hardware)
•  Supports 7.1 Surround Sound with Dolby® TrueHD and
    DTS-HD Master Audio™
•  Supports CEC control commands
•  Supports RCP (Remote Control Protocol) with extended
    support for TV remote controls and peripheral devices such
    as touch screen, keyboard or mouse
•  Supports HDCP 2.2 (High-Bandwidth Digital Content Protection)
•  Charging power: up to 10 W
•  Cable length: ca. 1 m (incl. connector)

Other cable lengths:

2 m  Item 83649 ,  3 m  Item 83650 ,  5 m  Item 83651

Item 83644

Cable RJ45 Cat.6A SSTP angled / straight

Network cable for connection of different network devices. The angled connector enables a space-saving installation.

•  RJ45 male angled
•  RJ45 male straight
•  1:1 connected
•  Cat.6A specification
•  S/STP
•  Copper wire
•  LS0H (halogen free)
•  Cable gauge: 26 AWG
•  Cable length: ca. 0.5 m

Other cable lengths:

1 m  Item 83645 ,  2 m  Item 83646 ,  3 m  Item 83652

Item 20646

Stand for Tablet / iPad / E-Book-Reader

Stand for mobile use for iPad, tablets and E-Book-Reader.

•  For 7″ - 10″ devices suitable
•  Material: aluminium diecast
•  2 different angles adjustable, ca. 45° and 15°
•  Rubber pads for safe grip and secure stand
•  Weight: ca. 200 g
•  Dimensions (LxWxH): ca. 180 x 25 x 10 mm (folded)

Item 65628

Adapter Raspberry Pi GPIO Pin Header to Serial RS-232

Connection of a serial device with GPIO interface of Rasperry Pi.

•  1 x Sub-D 9 pin male RS-232
•  1 x 4 pin pin header
•  Supported baud rate up to 230 Kb/s
•  Level shifter from RS-232 3.3 V to 5 V on Raspberry Pi
•  Supported input voltage: 2.7 V ~ 5.25 V
•  OS independent, no driver installation necessary
•  Dimensions (LxWxH): ca. 48 x 43 x 16 mm

Item 89389

PCI Express Card to 2 x external USB 3.0 + 2 x internal SATA 6 Gb/s – Low Profile Form Factor

Expansion of your PC by two external USB 3.0 ports and two internal SATA ports.

•  External:
    2 x USB 3.0 type A female
•  Internal:
    2 x SATA 6 Gb/s 7 pin female
    1 x SATA 15 pin power connector
    1 x PCI Express x1, V2.0
•  Chipset: Asmedia
•  Data transfer rate:
    USB 3.0 up to 5 Gb/s
    SATA up to 6 Gb/s
•  Supports xHCI specifications V1.0
•  Power supply via PCI Express interface or via SATA
    power connector
•  Pin header for LED to indicate the SATA connection
•  Supports Native Command Queuing (NCQ)
•  Supports SATA Hot Plug

Contact Overview of the
last newsletter		 Delock Homepage Subscribe
Newsletter		 Cancel
Newsletter
DELOCK is a brand of the manufacturer
TRAGANT Handels- und Beteiligungs GmbH
Beeskowdamm 13/15
14167 Berlin / Germany 		Commercial Register: HRB 45788
Berlin Charlottenburg
VAT.-Number: DE 156330245
WEEE-Reg.-No.: DE 89394995 		All offered products are available, as long as stock lasts. All brand names listed here are registered trademarks of their respective companies. Changes, delivery times and errors are subject to change.